Tie-Grabbers
KN510
- The KN510 Tie-Grabber picks up and ties bales that are arranged by the AE10 bale accumulator. Two long, five wide, on edge.
- A lower weight requirement for this tie-grabber allows for the use of a smaller loader, and the bundle can be picked up from any of its sides
- If bales are 36″ long, you are able to cross-stack them with this model or the 510 Grabber
- Requires a loader with at least 1,800lb lift capacity, and one set of remotes with an optional splitter or two sets of remotes without a splitter
Explore TheKN510 Tie-Grabber
1 
-
1KNOTTER
This highly reliable Rasspe Knotter allows for a consistent tying method.
-
2SQUEEZE ARM
Once the machine is aligned with the bale bundle, the Squeeze Arm applies pressure and squeezes the bales tightly together to form a strong and compact bundle. This arm is important for creating a bundle that is easy to stack, move, and load.
-
3LOADER MOUNT
This customizable option allows you the flexibility to move between multiple loader hookups.
-
4TWINE ARM
When hydraulically engaged, the twine arm wraps twine around the bundle of bales to hold the bundle together.
-
5MULTIPLE HOSE OPTIONS
This machine allows you to choose two hydraulic hoses with a wire control in the cab, or a four hydraulic hose option. This customizable feature allows you to choose the best option for your operation.
DETAILED SPECS
Bale Configuration
5 Bales Wide and 2 Bales Long
Bundle Dimensions
75” Wide by 64” to 96” Long
Required Loader Capacity
1,800
Working Height
2 ft. 6 in.
Working Length
6 ft. 0 in.
Working Width
6 ft. 0 in.
YOU MAY ALSO LIKE
510
Grabbers
408F
Grabbers
510F
Grabbers
612F
Grabbers
